Li-ion battery maker LG Chem recognized by GM as a 2015 Supplier of the Year Winner
GM to acquire Cruise Automation to accelerate autonomous vehicle development

Audi develops new generation of tools; bionic shapes and composite construction for material, weight and energy savings

Audi Toolmaking has a new, highly efficient generation of tools that is up to 20% lighter and 10% more stable than the previous generation. This makes the processing of sheet metal in the presses faster and more precise.The new tools are already being used in the press shop in Ingolstadt.

The new tools are up to eight tons lighter than conventional tools, which are made completely of cast iron and weigh up to 45 tons. The lower weight is primarily due to an ideal mix and distribution of the materials cast iron, aluminum and plastics. The composite construction concept is a feature of Audi’s lightweight construction in automobile engineering and is now used also in toolmaking.




Top: Conventional tool. Bottom: Next-generation tool. Click to enlarge.

An important role is played by innovative manufacturing methods such as metallic 3D printing. The new tools allow faster, more precise processing of sheet metal, are subject to less wear and tear, and are significantly more stable despite their reduced weight.


The material savings are visible in the structure of the new tools. The new design makes use of bionic shapes that resemble leaves or the bones of a human skeleton. Click to enlarge.

In total, Audi has achieved an energy saving of more than 10% through the use of the new tools.

With this lightweight and composite construction, we are setting new standards at Audi Toolmaking. This enables us to produce even more flexible und more efficient tools with the highest quality and to further optimize our manufacturing processes.

—Michael Breme, Head of Toolmaking at Audi AG

In addition to the materials used, a difference is made also by the construction of the new generation of tools, which differs fundamentally from that of their predecessors.


Various materials are combined in the new generation of tools. Lightweight and composite construction applies the principle of the right material in the right place in the right quantity. In addition to cast iron and aluminum, plastics are also used in the tools for the first time. Click to enlarge.

In the press, a tool is subjected to enormous forces of up to 2,500 tons. The stress is increased by the constant repetition of forming or cutting operations. Individually adapted arched shapes in the basic structure give the new tools optimal stability and thus improve the transmission of forces. The basic structure of a conventional tool relies on cast‑iron cross‑ribbing whereby the design of the ribs is adapted to the sheet-metal parts being produced.

With the new tool generation, the forces that have to be absorbed by the structure of the forming press are optimally distributed. This ensures good stiffness and also saves up to 20% material. Some of the tools’ shapes are derived from nature and resemble leaves or the bones of a human skeleton for example. Once again, innovative manufacturing processes play a decisive role in the manufacturing of such “bionic shapes.”

Comments

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Post a comment

Your Information

(Name is required. Email address will not be displayed with the comment.)

source designedby3d.com

Был найден мной классный блог на тематику уборка офиса после ремонта https://cleansale.kiev.ua/poslestroitelnaya-uborka-ofisov
cleansale.kiev.ua/floor-cleaning